Applied Rheology: Publications
Donald G. Baird, J. Huang
Elongational Viscosity Measurements Using A Semi-Hyperbolic Die

Appl. Rheol. 16:6 (2006) 312-320

Abstract: The lubricated semi-hyperbolic die has been proposed as a technique for generating uni-axial extensional flow and, hence, as a device for measuring elongational viscosity. Two methods for extracting extensional viscosity data for polymer melts in laminar flow from this device have been proposed and are evaluated here. Following the approach proposed by Collier and coworkers, values of the transient extensional viscosity, ηc+, obtained from a non-lubricated semi-hyperbolic (SHPB) die for several polyethylene (PE) melts were found to be considerably higher than values obtained by means of the Münstedt type device. Furthermore, the values of ηc+ obtained from the SHPB die were considerably higher than the strain averaged values of ηc+ which Everage and Ballman proposed would be obtained from a lubricated SHPB. The pressure drop across a SHPB die was estimated assuming resistance was all due to wall shear (using the lubrication approximation) for two PE resins. In the case of low density PE (LDPE) the values agreed to within 20% of the measured values suggesting that shear effects at the die wall were dominating the pressure drop and not extensional stresses. An analysis was carried out which showed that in the presence of lubrication the conditions for which the values of ηc+ obtained from the SHPB would be relatively accurate (Hencky strains > 5.0). © 2006 Applied Rheology.

DOI 10.3933/ApplRheol-16-312

-- full text PDF available for subscribers --

-- open access PDF extract available for non-subscribers --

You have no password-free access to Applied Rheology Online. If you are a subscriber, enter login details below. For password-free access, we need your IP address. Sample manuscripts for free download can be found here

download to disk (some browsers prefer this option)
login name

Purchase this article for 20 € ?

Forgotten your login details? Send an email with subject "AR login" to

Appl Rheol 16 (2006) issues:


© Applied Rheology 2018