![]()
http://www.complexfluids.ethz.ch/snf19 This project is supported by the Swiss National Supercomputing Centre
Surface dilatational viscoelasticity of adsorbed layers of pluronics triblock copolymers at the air-water interface was measured using the oscillating barrier technique. The effect of molecular architecture and concentration on surface viscoelasticity was explored for two different types of pluronics with different degrees of hydrophobicity, Pluronic F-108 (M-w approximate to 14 600 g/mol) and Pluronic P-123 (M-w approximate to 5800 g/mol), the former exhibiting a larger hydrophilic to hydrophobic block length ratio. Frequency sweeps in the linear regime suggested that interfacial films of F-108 have higher surface limiting elasticity and larger in-plane and out-of-plane relaxation times at the same bulk concentration (the former possibly related to in-plane microstructure rearrangements, the latter to surface/bulk diffusion). Increasing the bulk concentration of pluronics from 1 to 100 mu M led to a decrease in both in- and out-of-plane relaxation times. Large amplitude oscillatory dilatation (LAOD) tests were performed to capture nonlinear behavior of these interfacial films by means of elastic and viscous Lissajous plots. Nonlinearities in elastic responses were quantified through calculation of the strain-stiffening indices in extension S-E and compression S-C. Both pluronics exhibited strain softening in extension. In compression, P-123 showed strain-hardening and F-108 displayed a relatively linear response. Apparent strain hardening in extension was observed for the P-123 adsorbed film, at high strain, at a bulk concentration of 100 mu M. However, at these strains, the response was dominated by the viscous contribution and calculation of strain rate-thickening factors in extension and compression showed that the overall response was strain rate-thinning in extension and strain rate-thickening in compression. [Moghimikheirabadi, Ahmad; Kroeger, Martin] ETH Rich, Dept Mat, Polymer Phys, CH-8093 Zurich, Switzerland. [Fischer, Peter] Swiss Fed Inst Technol, Lab Food Proc Engn, Dept Hlth Sci & Technol, CH-8092 Zurich, Switzerland. [Sagis, Leonard M. C.] Wageningen Univ, Food Phys Grp, Bornse Weilanden 9, NL-6708 WG Wageningen, Netherlands. Moghimikheirabadi, A (corresponding author), ETH Rich, Dept Mat, Polymer Phys, CH-8093 Zurich, Switzerland. ahmad.moghimikheirabadi@mat.ethz.ch [hide]
Principal Investigators
Argyrios Karatrantos (PI)
Institute of Science and Technology, Luxembourg ►
Martin Kröger (PI)
Polymer Physics, ETH Zurich, Switzerland ►
Project Partners
Clement Mugemana
Institute of Science and Technology, Luxembourg ►
Jeremy Odent
Laboratory of polymeric and composite materials, Mons University, Belgium ►
Scientific Staff
Ahmad Moghimikheirabadi
Polymer Physics, ETH Zurich, Switzerland ►
Secretary
Patricia Horn
Polymer Physics, ETH Zurich, Switzerland ►
Enjoy your reading
M Kroger,
Developments in Polymer Theory and Simulation
POLYMERS English 12 (2020) 30 ►Selected conferences (co-)organized by project members
3rd Global Summit Nanotechnology & Nanomedicine
Sep 2019, 3rd Global Summit Nanotechnology & Nanomedicine, Barcelona, Spain ►
learn more ►
About this project
Fundamentally important to the processability and the material properties of polymer nanocomposites is the underlying interaction between polymer and nanoparticles, the resulting structure and dynamics. A high degree of nanoparticle dispersion is necessary for an effective reinforcement in a polymer matrix. A recent experimental approach to distributing nanoparticles into a polymer matrix is to let the interaction between nanoparticles and polymer chains to be of ionic nature.Ionic nanoparticles can impart charged polymers with unique mechanical and functional properties such as self-healing and shape memory. Upon studying a single model nanocomposite via molecular simulation, we found that nanoparticle dispersion can indeed be achieved due to the insertion of electrostatic charge, that nanoparticle diffusion slows down due to this electrostatic charge, and that the ionic nanoparticles move according to a hopping mechanism.
These recent findings have the potential to spur new studies in modelling ionic polymer nanocomposites containing ionic functionalized silica nanoparticles.
We hereby propose to focus in a more detailed and conclusive fashion on four combined experimental/theoretical research objectives:
Investigate the role of ionic interactions and calculate viscoelastic properties (viscosity, storage modulus, loss modulus) with nanoparticle loading, for differently charged and sequenced polymers.
Quantify the lifetime of dynamic crosslinks between nanoparticles and polymers, formed in ionic nanocomposites, during deformation processes.
Calculate the dynamics and structure of polymers and their entanglements for differently charged and filled polymer ionic nanocomposite models,
Resolve the role of nanosilica surface confinement on polymer entanglements and dynamics. The novelty of the proposed work stems from the combination of experiments, simulation and theoretical models to capture the interactions and polymer structural/dynamical, as well as rheological phenomena present in these ionic nanocomposites, who seem to offer qualitatively new properties worth being quantified and supplemented with an informed microscopic picture.
Lay-Summary (German only, as required by SNF)Hintergrund: Polymer-Nanokomposite (PNCs) stellen eine zunehmend wichtige Hybrid-Materialklasse dar. Das fehlende Verständnis der chemischen und physikalischen Mechanismen stellt seit Jahrzehnten ein Hindernis bei der weiteren Entwicklung dar. Für die Verarbeitung und die Eigenschaften von PNCs ist die Wechselwirkung zwischen Polymer und Nanoteilchen, sowie die resultierende Struktur und Dynamik von fundamentalem Interesse. Eine gute Dispersion der Nanoteilchen wird für die effiziente Verst&aauml;rkung von Polymer-Muttergewebe benötigt. Einer der neueren Ansätze, die diese Eigenschaft bewerkstelligen soll, ist die Verwendung von ionischen PNCs. Ionische Nanoteilchen können den ionischen Polymeren zudem neuartige mechanische und funktionelle Eigenschaften verleihen. Inhalt und Ziel des Forschungsprojekts ist ein besseres Verstädnis der ionischen PNCs. Dazu untersuchen wir die (i) Rolle von ionischen Wechselwirkungen und berechnen viskoelastische/mechanische Eigenschaften und ihre Abhäigkeit von System-Parametern (Konzentration, Ladungen, Ladungs-Sequenzen); (ii) Lebensdauer von Vernetzungspunkten in PNCs, isbesondere während Deformationsprozessen; (iii) Dynamik und Struktur der Polymere und deren Verschlaufungs-Netzwerke in Abhängigkeit der Ladungs-Sequenz; (iv) Rolle der Oberflächen-Beschaffenheit von Nano-Silikaten. Wissenschaftlicher und gesellschaftlicher Kontext des Forschungsprojekts. Wir möchten neuen Technologien für PNCs den Weg bereiten, die benötigt werden, um leichte, hoch-qualitative, und multifunktionelle Materialien weiter zu entwickeln. Ionische PNCs verprechen nicht nur die genannten mechanischen Eigenschaften, sondern auch ein Potential für Selstheilung, ionische Leitfähigkeit, und selektive Permeabilitä Simulationsmodelle erlauben uns, die genannten Abhäigkeiten im Detail zu untersuchen, und öffnen eue Horizonte für das Design ionischer PNCs für Anwendungen etwa in der Biomedizin, Biotechnologie, Energiespeicherung, Gastrennung.
04 May 2025
mk