ContributionsFollow the blue link(s) below for abstracts and full text pdfs .
Author index ►L.A. Pereira de Oliveira, J.P. Castro Gomes, M.C.S. Nepomuceno
Most cited recent articles ►
Articles for free download ►
Search conferences ►
The influence of wastes materials on the rheology of rendering mortars
Appl. Rheol. 23:1 (2013) 15505 (11 pages) ►
The objective of this paper is to present the results of a research about the effect of mineral additions and specific lightweight aggregates obtained from wastes materials (crushed EPS and cork) on the rheological properties of renderings mortars. Four series of mortar formulations were prepared. Each series was composed by four mortars mixes with different mineral additions: hydrated lime, glass powder, tungsten mine waste mud, and metakaolin. The proportions of the mortars expressed in terms of apparent volume of cement, mineral addition and sand was 1:1:5. Flowability of mortar was measured using a standard flow table test. The density and the water retention capacity of mortars were also determined. The mortar rheological parameters were evaluated using a rheometer. The results show that the mortar yield stress is strongly influenced by the water amount, binder fineness and mineral addition nature. The mortars plastic viscosity is also influenced by the nature of mineral addition and the partial replacement of sand by EPS aggregates introduce incongruent values, caused by the segregation, in the mortar yield stress, whereas, the cork aggregates is responsible by the yield stress reduction.► Cite this publication as follows:
PereiradeOliveira LA, CastroGomes JP, Nepomuceno M: The influence of wastes materials on the rheology of rendering mortars, Appl. Rheol. 23 (2013) 15505.
© Applied Rheology 2019