## Contributions

Follow the blue link(s) below for abstracts and full text pdfs .

matching >Murphy.SH<

Author index ►J. J. Duffy, A. J. Hill, S. H. Murphy

Most cited recent articles ►

Articles for free download ►

Search conferences ►

Simple method for determining stress and strain constants for non-standard measuring systems on a rotational rheometer

Appl. Rheol.25:4 (2015) 42670 (6 pages) ►

There is often a necessity to measure, or at least estimate, true viscosity values using non-standard measuring systems on a rotational rheometer. This may be to replicate a mixing or manufacturing process on a lab scale, to keep a sample dispersed and uniform during a measurement or to measure some rheological property that would be difficult or impossible with a standard configuration. Such measurements can be made easily enough, but without a process for converting torque to shear stress and angular velocity to shear rate only these raw data variables can be reported. In this paper a simple and novel empirical method for determining strain/strain rate C_{1}and stress C_{2}constants for non-standard measuring systems on a rotational rheometer is presented. This method uses relative torque measurements made with a Newtonian and non-Newtonian material and their corresponding power law fitting parameters to determine C_{1}and C_{2}using a non-linear regression analysis. Equilibrium flow curves generated for two non-Newtonian fluids using two non-standard mixing geometries show very good agreement with data generated using a standard cone and plate configuration, therefore, validating the approach.► Cite this publication as follows:

Duffy JJ, Hill AJ, Murphy SH: Simple method for determining stress and strain constants for non-standard measuring systems on a rotational rheometer , Appl. Rheol. 25 (2015) 42670.

© Applied Rheology 2024