ContributionsFollow the blue link(s) below for abstracts and full text pdfs .
Author index ►Abdelhak Kaci, Rachid Bouras, Mohend Chaouche, Pierre-Antoine Andreani, Herve Brossas
Most cited recent articles ►
Articles for free download ►
Search conferences ►
Adhesive and Rheological Properties of Mortar Joints
Appl. Rheol. 19:5 (2009) 51970 (9 pages) ►
Adhesive properties of fresh mortar joints containing different dosage rates of a water-soluble polymer (cellulose ether based) are investigated using the probe tack test. This test consists of measuring the evolution of the normal force required to separate at a given velocity two plates between which a thin layer of the sample is sandwiched. Three different adhesive components are inferred from the measured stretching force: cohesion, adhesion and adherence. The influence of the polymer dosage rate and the pulling velocity on the evolution of these adhesive properties is investigated. The adhesive components are then related the rheological properties of the mortars which are shown to behave as Herschel-Bulkley shear-thinning fluids.► Cite this publication as follows:
Kaci A, Bouras R, Chaouche M, Andreani P, Brossas H: Adhesive and Rheological Properties of Mortar Joints, Appl. Rheol. 19 (2009) 51970.
A. Kaci, M. Chaouche, P.-A. Andreani, H. Brossas
Rheological behaviour of render mortars
Appl. Rheol. 19:1 (2009) 13794 (8 pages) ►
Steady state and transient rheological behaviours of a one-coat render mortar are considered experimentally using a shear rheometer equipped with the vane geometry.The flow curves performed at controlled shear-rates exhibit highly pronounced minima, which is attributed to shear localization and strong thixotropy. This latter property is further investigated separately by considering the temporal growth of the apparent stress at very low shear-rate, reflecting the material's microstructure rebuild up following shearing at different high shear rates. It is found that rebuilding characteristic time is roughly independent upon shear history, indicating that this is a material parameter. The influence of water dosage rate on the rheological behaviour is considered. As expected, apparent viscosity and yield stress decrease with increasing kneading water amount. The rebuilding up kinetics is found to be non sensitive to water dosage rate, suggesting that the material's processability would be preserved when changing this parameter, although significant creeping may be expected at high water dosage rates.► Cite this publication as follows:
Kaci A, Chaouche M, Andreani P-A, Brossas H: Rheological behaviour of render mortars, Appl. Rheol. 19 (2009) 13794.
© Applied Rheology 2022