## Appl Rheol online available publications for selected issue

Follow the blue link(s) below for abstracts and full text pdfs .

► Cite this publication as follows:

Rheological Societies: Society's Site Mar 2016 - Aug 2016, Appl. Rheol. 26 (2016) 49.

► Cite this publication as follows:

Fischer P: Traffic Flow Dynamics - Data, Models, and Simulation (Martin Treiber and Arne Kesting), Appl. Rheol. 26 (2016) 11.

► Cite this publication as follows:

Lequeux F, Cassagnau P, Valette R, Ducouret G: Flow and Processing of Highly Filled Materials Workshop (2016), Appl. Rheol. 26 (2016) 47.

► Cite this publication as follows:

Jarnstrom L: Highlights from the 24th Nordic Rheology Conference (NRC 2015), Appl. Rheol. 26 (2016) 53.

► Cite this publication as follows:

Thompson RL, Naccache MF: VII Brazilian Conference on Rheology (BCR 2015), Appl. Rheol. 26 (2016) 52.

Natural rubber latex concentrate (NRLC) is an important material used in manufacturing dipped products, yet thorough analysis of their colloidal and rheological properties are still lacking in these areas. In this work, the colloidal and rheological behaviour of the NRLC was studied. The NRLC particle size was in the range of 0.3 to 2 μm with narrow particle size distribution. The response of NRLC to an applied deformation was assessed through rheological experiments which include dynamic oscillation and steady state measurements. A change from liquid-like to solid-like behavior was observed as the volume fraction of the NRLC was increased above 0.48. The plastic viscosity and yield stress of the NRLC increased with increasing volume fraction according to the Bingham equation. The maximum packing volume fraction of the NRLC was found to be 0.75 with a diffused double layer thickness of 14 nm at φ=0.61.► Cite this publication as follows:

Lim H, Misran M: Colloidal and rheological properties of natural rubber latex concentrate, Appl. Rheol. 26 (2016) 15659.

Rheological studies of the ceramic based concentrated titania nanoparticle dispersions showed a clear correlation between molecular structure of the cationic polymers used as dispersants and the viscosity of the slurries. Dynamic viscosity of the electrostatically stabilized alkaline (pH 10.0) dispersions of the bare titania nanopowders with a solid loading of 15 - 25 wt.% was rather high (about 1 Pa.s) and the dispersions exhibited shear-thinning flow behavior. For electrostatic and steric stabilization of the concentrated ceramic nanodispersions of titania in alkaline conditions, the dispersions were treated with cationic comb copolymers differing in charge density and the length of PEO side chains. The dispersions treated by the cationic comb copolymers acted as the Newtonian fluids at low and medium shear rates (< 200 s-1) and showed shear-thickening flow behavior at higher shear rates. Dynamic viscosity of the dispersions with a solid loading of 15 - 25 wt.% treated by the cationic comb copolymers was very low (2 to 30 mPa.s). 1► Cite this publication as follows:

Klimkevicius V, Makuska R, Graule T: Rheology of titania based ceramic nanodispersions stabilized by cationic comb copolymers, Appl. Rheol. 26 (2016) 15199.

DLS Microrheology involves tracking the time dependent motion or mean square displacement of dispersed tracer particles of known size using Dynamic Light Scattering (DLS) in order to determine viscoelastic properties of the dispersion medium. The viscoelastic moduli are calculated using a generalised form of the Stokes-Einstein equation which requires Fourier Transformation of the MSD. An alternative approach for estimating the viscoelastic moduli uses a modified algebraic form of the generalized Stokes-Einstein equation, which employs a power law expression to describe the local change in MSD with time. Since the mean square displacement is linearly related to the creep compliance, it can be shown that the same algebraic approach can also be applied to creep measurements made on a rotational rheometer, giving access to the low frequency moduli in a fraction of the time required for oscillatory testing. Furthermore, the quality of the conversion process can be improved by fitting a Burgers model to the time domain data prior to conversion thus minimising errors associated with local differentiation, which is fundamental to the conversion approach.► Cite this publication as follows:

Duffy JJ, Rega C, Jack R, Amin S: An algebraic approach for determining viscoelastic moduli from creep compliance through application of the Generalised Stokes-Einstein relation and Burgers model, Appl. Rheol. 26 (2016) 15130.

Measurements and modeling of the nonlinear viscoelastic properties of a high viscosity silicone oil (polydimethylsiloxane, PDMS) are reported. LAOS test were performed with a high precision rotational rheometer to probe the nonlinear response. The measurements show that the material can be safely considered linear below strain amplitude 1. The viscous Lissajous-Bodwitch curves indicate intracycle shear thinning, whereas the elastic Lissajous-Bodwitch curves indicate intracycle strain stiffening in the nonlinear regime. Secondary loops in some of the measured viscous stress curves are attributed to a non-sinusoidal shear rate signal. A multi-element White-Metzner model is used as a constitutive equation, which accurately describes the LAOS data in all measured cases. Based on the extension of the measured data by simulations, nonlinear properties are analyzed both for the elastic and for the viscous part. It is observed that the nonlinearity considerably increases the weight of the higher harmonics in the shear stress signal. It is predicted that the viscous nonlinearity has a maximum around 50 rad/s angular frequency, and that the elastic nonlinearity becomes nearly independent of the angular frequency above 30 rad/s.► Cite this publication as follows:

Kokuti Z, Volker-Pop L, Brandstatter M, Kokavecz J, Ailer P, Palkovics L, Szabo G, Czirjak A: Exploring the nonlinear viscoelasticity of a high viscosity silicone oil with LAOS, Appl. Rheol. 26 (2016) 14289.

© Applied Rheology 2022