| The transient recoverable deformation ratio after melt elongation at various elongational rates and maximum elongations was investigated for pure polystyrene and for a 85 wt.% polystyrene/15 wt.% linear low density polyethylene (PS/LLDPE 85:15) blend at a temperature of 170 degrees C. The ratio p of the zero shear rate viscosity of LLDPE to that of PS is p = 0.059 approximate to 1:17. Retraction of the elongated LLDPE droplets back to spheres and end-pinching is observed during recovery. A simple additive rule is applied in order to extract the contribution of the recovery of the elongated droplets from the total recovery of the blend. In that way, the recoverable portion of the PS/LLDPE blend induced by the interfacial tension is determined and compared with the results of a theory based on an effective medium approximation. The effective medium approximation reproduces well the time scale of the experimental data. In addition, the trends that the recoverable deformation increases with elongational rate and maximum elongation are captured by the theoretical approach.
for LaTeX users @article{UAHandge2007-46,
author = {U. A. Handge and K. Okamoto and J. Münstedt},
title = {Recoverable deformation and morphology after uniaxial elongation of a polystyrene/linear low density polyethylene blend},
journal = {Rheol. Acta},
volume = {46},
pages = {1197-1209},
year = {2007}
}
\bibitem{UAHandge2007-46} U.A. Handge, K. Okamoto, J. Münstedt,
Recoverable deformation and morphology after uniaxial elongation of a polystyrene/linear low density polyethylene blend,
Rheol. Acta {\bf 46} (2007) 1197-1209.UAHandge2007-46
U.A. Handge, K. Okamoto, J. Münstedt
Recoverable deformation and morphology after uniaxial elongation of a polystyrene/linear low density polyethylene blend
Rheol. Acta,46,2007,1197-1209 |
mk@mat.ethz.ch
1 out of 816 entries requested
[H-factor to-date: > 0]
